Car Tire Air Pressure Gauge High-Precision Digital Car Tire Air Pressure Gauge Meter LCD Display Manometer Barometer For Car Truck

Product Introduction：

1. Digital display chip, LCD display screen, the test is more accurate, more reliable, and cost-effective.
2. Four test units: PSI, BAR, KPA KG
3. The button battery can be replaced.
4. Streamlined appearance design, more exquisite.

Specifications:

●Range:0-150PSI or 0-10 Bar or 0- 10 Kgf/cm* or 0- 1000Kpa.
●Display:21 * 10mm LCD display
●Power:LR44 button battery
●Operating temperature:-5 ~50’C
●Reduce tire wear and extend tire life
●Increase fuel efficiency
●Improve vehicle handling and safety
●Range:0-150PSI or0-10Bar or 0-10 Kgf/cm’ or 0- 1000Kpa。LCD Light demonstration, Automatic shut-off. Engineering plastics shell.

●TG105 TG205 R-6802.

Helpful Hints:

●0 Press the “ON/UNIT/OFF” button. Wait for “0.0” PSI or “0.00” Bar or “0.00” Kgf/cm2 or “0” Kpa display and bleep sound.
●Place the nozzle of the gauge over the tire valve. Press firmly to ensure good seal and prevent air escaping.
●Hold gauge on the valve until the reading on the LCD display locks.
●Remove the gauge quickly from the valve and read pressure.
●To retake the reading simply place the nozzle over the tire valve again and repeat.
●Gauge will automatically shut off 20 or 60 seconds after use. Gauge can be manually turned off by holding the “ON” button down for more than 3 seconds.
●In order to get a good seal, please put the tire’s air nozzle was up or off to the side.
It’s best when the nozzle is around the 6 or 7 o’clock position So that you can firmly press the gauge straight down. This means you have to crane your head a bit to read the digital measurement, but the important thing is to be able to press down straight & hard onto the tire’s nozzle.

Packing List:

1*Digital tire pressure gauge (TG105, TG205, R-6802 optional)