Auto Clean Anti-Falling Smart Window Glass Cleaner Control Robot Vacuum Cleaner

Auto Clean Anti-Falling Smart Window Glass Cleaner Control Robot Vacuum Cleaner

What’s the window cleaning robot?

WS-600 (Without LCD) Window Spirit is a glass-cleaning robot, with a vacuum motor inside that can suck air and stand on the glass surface.
It also can clean the table, floor, wall, door, ceiling and all flat surface.

Details:

How to work?

Product features:

• For any kind thickness glass AI Technology
• Cleaning speed: 3 minutes/meter^2.
• 3 kinds of automatic operation modes for cleaning entire window Auto-finish.
• Embedded UPS (UN-interrupted Power System) Anti-dropping control algorithm
• Auto detect edges of window Micro-fiber cloth
• High strength safety rope (150Kgf) Remote control
• Table cleaning mode
• Power consumption：80W
• Input voltage: 100~240VAC, 50~60Hz

 

Read all instructions before operating the device WARNING:

• 1. Fasten the safety rope and tie to indoor fixture before operating the device.
• 2. Check if the safety rope is broken or the knot is loose before operating the device.
• 3. Set danger-warning area downstairs for no-balcony window and door.
• 4. Battery shall be full-charged (green lamp ON) before using.
• 5. Do not use it in rainy or moist day.
• 6. Turn power on before put device onto glass.
• 7. Make sure appliance can stick and stand on glass surface while put onto glass.
• 8. Before turn power off, please hold device.
• 9. Do not use it on frame-less glass.
• 10. Make sure put cleaning ring onto cleaning wheel correctly for no leakage.
• 11. Do not spray or pour water onto the appliance.
• 12. Prohibit children from using this device.
• 13. Remove anything on the glass. Do not use on cracked glass. Reflective or coating glass might be slightly scratched due to dirt on the glass while operating.
• 14. Keep hair, loose clothing, fingers, and all parts of body away from the openings and moving parts.
• 15. Do no use in areas with existed flammable or combustible liquids, gas.

 

Packing list:

• Device x 1
• Remote controller x 1
• Adapter (100~240VAC, 50~60Hz) x 1
• AC power cord x 1
• DC power extension cable (4 meter) x 1
• Cleaning cloth x 12
• Cleaning ring x 4
• User manual x 1

Frequently Asked Questions (FAQ)

Q1: when start the machine, hear the alarm sounds, the red light flashing on the back.

The solution:
(1) check whether the plug and socket have connected to electricity, please maintain switch socket normal power supply.
(2) check whether it is caused by a transformer or the power cord damage, in this case, you need to change the new matching transformers or power supply cord.

Q2: If Robot can’t start-up and alert at the beginning of self-test.

The solution:
It means that the friction factor is not properly used. Please check:

(1) Whether the cleaning cloth is too dirty.

(2) Glass stickers, window film on the glass will also affect the friction factor.

(3) If clean window many times, the glass surface will become very slippery.

(4) The glass surface will become slippery if clean several times in low humidity environment such as in air-conditioned room.

Q3: Robot slips and cannot get higher to the window frame.

The solution:
(1) Friction factor is too low that might be caused by glass stickers, window film on the glass.

(2) Cleaning cloth might be too wet.

(3) If clean window many times, the glass surface will become very slippery.

(4) The glass surface will become slippery if clean several times in low humidity environment such as in air-conditioned room.

Q4: Robot does not move smoothly or move irregularly.

The solution:
(1) Glass surface has different friction factor areas due to stickers, window film, and so on. Please use Robot in single area.

(2) The screw of cleaning wheel might be get loose, just tighten it.

Q5: Send out alarming infirst running process, red lamp flashing.

The solution:
(1) Cleaning cloth is too dirty, Please change a clean-cleaning cloth.
(2) Please Check the cleaning cloth is installed correctly.

Q6: What to do if Robot stopped at higher area while no electric power supplied, Robot alarmand red lamp is flashing?

The solution:
(1) User can pull Robot back with safety rope. Slightly pull the safety rope atan angle close to the glass to prevent dropping.

(2) Switch the power-switch to “off”.

(3) Check out whether electric poor-contact, cable broken or not.

Q7: What to do if Robot abnormally stopped and red lamp is flashing, without alarm?

The solution:
(1) User can move Robot to safe area by remote control, or pull robot back with safety rope. Slightly pull the safety rope at an angle close to the glass to prevent dropping.

(2) Switch the power-switch to “off”

(3) Check out whether electric poor-contact, cable broken or not.

(4) Check whether there is air-leakage caused by gap, uneven window frame.

Q8: After cleaning, remained circle mark on the glass surface.

The solution:
Cleaning cloth is too dirty. Please change a clean-cleaning cloth and clean again.

 

 

Kind note：

1)Now all the robot will come with the English Packing with the English Manual. 2)About the Packing and logo, there may come with “Devvis” brand,With other logo, or without logo Etc……But they are THE SAME product ,hope you can accpet it before you buy.

 

​

3.In order to ensure you receive your order with tax free or lower tax upon import,we’ll declare it as a”gift” with a lower value”50$”,if any import charges or fees are the buyer’s responsibility.

Payment:

We support the following payment methods. All payments made on AliExpress are processed by Alipay.

 

Warranty and Terms:

• All our goods (unless otherwise specified) are assured to be brand new and carried with fully at least One year warranty.
• During warranty Time, if any problem happens due to quality reason, please be cooperative to take photos or videos on the problem and send to us for verifying by email.
• For confirmed product faulty on your approval, we can send you free spare parts for replacement.

Real picture from buyer’s Feedback: