12 Modes Pain Relief Therapy Device TENS/EMS Health Smart Screen Dual-Output Acupuncture Physiotherapy Electronic Pulse Massager

12 Modes Pain Relief Therapy Device TENS/EMS Health Smart Screen Dual-Output Acupuncture Physiotherapy Electronic Pulse Massager

Directions for Use:

1. The unit may need to be charged for up to about an hour when the battery level is low.

2. Connect the wire to the output port at the top of the unit.

3. Connect a pair of pads to a dual leads wire by snapping them on

4. Remove the protective film and place the two pads on muscle, making sure that both pads are on skin and not overlapping.

5. Turn on the unit via the on/off switch.

6. When you have turned on the unit it will start in mode 1.

7. To change the modes press the M button. Once you have selected a mode, gradually increase the intensity by pressing the + button; decrease the intensity by pressing the – button.

8. To set the time by pressing the T button from 10 minutes up to 60 minutes. Default time setting: 20 minutes.

Mode Description:

• We suggest that you initially experiment using each of the modes. The mode or combination of modes that gives you the most desirable sensations ad comfort is the most appropriate one for you to use.

• Intensity should be set at a level where you will feel some muscular vibration and involuntary muscle movements. It should be set to give a “comfortable” intensity and should not be painful.

• Timing of application should be at least 10 to 20 minutes.

• Frequency of the application should be at one to three times per day.

Included in the box:

• Control unit • 1 set of small single sided adhesive electrode pads

• 1 set of large single sided adhesive electrode pads

• 2 electrode wire with 2 leads

• 1 instruction user manual

• USB extension wire

• AC/DC adaptor

• Application acupuncture points chart

• Pad holder

NOTE：

1. Find the exact pain point; this is the position for the pads to be placed. The acupuncture chart can also serve as a guide for pad placement specific to each ailment.

2. Adjust the intensity gradually. It is more effective to reach the highest intensity level you can stand.

3. Recommended application duration is 2-3 times per day for 40-60 minutes per application, over 10 days for one course.

4. Pads can be placed in two ways: • Twin Mode – with the 2 pads next to each other on the same side of the body and in close proximity.

• Opposed Mode – with the 2 pads on a similar spot, but on either sides of the body, i.e. the front and back shoulder.